Boost Bike Mileage: Essential Tips for Riders

Driving along a buttery smooth roadway with the sky above painted a sunset orange is how one imagines while riding a two-wheeler. Others visualize themselves hitting the turns of a lengthy, twisting road, knee pads scraping against the accelerator. But the reality is that you’ll probably be discontent under the acceleration of city traffic while driving in first gear most of the time.

A bike’s power, top speed, and acceleration are irrelevant in this kind of situation. The most important factor is fuel efficiency, which is especially crucial given the continuously rising cost of fuel. To help you increase bike mileage, here are ten helpful tips that can help you get more miles out of your bike.

Tips on How to Increase Bike Mileage

Do not make sudden gear changes

The clutch is subjected to an extensive amount of pressure from rapid gear changes, which eventually causes damage and reduces mileage. High RPM gear shifting, rapid gear changes, and even low gear driving are examples of heavy gear shifting. Low mileage is the outcome of all these factors affecting the engine and clutch pad. 

Refrain from using heavy trafficked routes 

You use more fuel when driving through dense traffic because you have to shift gears frequently. If you find yourself trapped in heavy traffic, try shifting gears slowly and turning off the engine when it’s not needed. Turn it off when you can’t move, even during traffic signals.

Steer clear of sudden acceleration and heavy braking

Sudden acceleration indicates fast speed and high RPM, which causes significant fuel burn. The experts recommend keeping the proper RPM while accelerating gradually and shifting gears appropriately.

Additionally, a significant amount of fuel is lost when braking suddenly, sharply, and abruptly. It is recommended to apply the brakes while keeping a safe distance in such situations. By doing this, safety is guaranteed and instances of abrupt braking or related unintentional events are avoided.

Also read: Top 10 Bike Servicing Tips for Better Performance

Maintain your speed of bike

The majority of bike models refer to the “economy speed” displayed on the speedometer. One piece of advice is to shift into the highest gear when riding your bike faster than 60 kmph. This guarantees consistent and seamless fuel usage. Make an effort to learn defensive riding strategies. The ideal speed range for this is between 40 and 55 kmph. Aim to remain calm and refrain from driving too fast in urgent situations. 

Carburetor problems 

Make sure everything is in working order when riding a bike, especially the carburettor. Heavy fuel loss is likely if it is covered in dust and debris or if it is still tuned. As a result, you need to keep the carburettor clean and adjust it often, either manually or electronically.

Check Tire Pressure

In order to prevent a tire burst, you must make sure to check the tire pressure regularly. A tire with low pressure will require more energy to run. This results in a higher engine load, which lowers the vehicle’s total mileage. Maintaining the proper tire pressure is essential to your two-wheeler’s overall performance and safety. 

Examine the Quality of the Fuel 

It is essential to use fuel of the highest quality that is recommended by the manufacturer to preserve bike performance and avoid engine damage. In addition to increasing the risk of safety problems and contributing considerably to air pollution, contaminated fuel can cause irregular consumption patterns, engine damage, and higher emissions of gasses including nitrogen oxides and carbon monoxide. To prevent these problems and guarantee both environmental responsibility and the best possible bike performance, it’s best to stick to reliable gas stations.

Chain Lubrication

If you ride on any road that has an excessive amount of sand, dirt, or dust on it, you need to oil the chain very often. The engine needs more power to rotate the chain when there is inadequate lubrication, which results in increased fuel consumption. 

Examine the Oil in the Engine 

Poor engine oil performs poorly and lowers the bike’s total mileage. As a result, you have to be careful to use only regular quality engine oil. 

Make Sure the Bike is Regularly Serviced

Maintaining the health and performance of a bike requires routine servicing. It guarantees best mileage and increases the life of the engine. The recommended servicing frequency, which takes weather variations into account, is 2 to 3 times per year. The quality of the air filter, engine oil levels, chain and clutch, lubrication, and tires are all significant checks.

Also read: Top Scooters with the Best Fuel Efficiency in 2024

Conclusion

Until their maintenance expenses are within our budget, bikes are useful. It is crucial to make sure the bike is operating at its best and providing the highest level of efficiency given the sharp increase in fuel costs. If after attempting every suggestion listed above to increase bike mileage you are still not seeing the desired effects, it’s time to replace it. Look into high-end possibilities for bikes and use an easily accessible bike loan to buy the bike that meets your needs.

Consider buying your next bike on OLX India – India’s biggest marketplace for buying pre-loved and pre-owned goods.

Frequently Asked Questions

What is the optimal speed to maximize fuel efficiency? 

Bike mileage usually peaks between 40 and 55 mph, going faster than this can result in reduced efficiency from greater wind resistance and engine rev.

Is bike efficiency affected by the type of fuel used?

Absolutely, your bike’s performance and mileage will increase if you use the proper octane rating of fuel. 

How can the fuel efficiency of my bike be improved? 

Optimize fuel efficiency by doing routine maintenance, monitoring tire pressure, and minimizing prolonged periods of inactivity.